TOTAL TRANSIENT CONTROL
The Transient Shaper Built For Sound Designers
TRANSFORCE is the transient shaper plugin for designers and producers who want both punch and control without the usual trade-offs. Independent processing on attack and sustain. Spectral processing that separates tonal content from noise. Parametric EQ and saturation per band, on each side. A Stylize module, a Clipper, and a Limiter to finish the job. Built for sound design, yet equally capable in music production.
Additional information
| Version | 14 Days Free Trial, Full Version |
|---|
SKU: 132b - Need Help? Contact Us Leave Feedback
Categories: Audio Tools, EDU
Contact Us
Leave Feedback
WATCH THE TRAILER

INDEPENDENT EQ ON ATTACK AND SUSTAIN
Transient EQ that does what a transient shaper plugin can’t do alone.
Most transient tools force a trade-off. Push the attack and the sustain rides up with it. Tame the body and the punch goes flat. TRANSFORCE splits attack and sustain into two signals you shape separately, each with its own parametric EQ across multiple bands and its own saturation. Shape the low end of the attack and remove rumble from the sustain at the same time. You get punch hits hard, and the sustain element sits exactly where you want it.

THE SPECTRAL SLIDER – TONAL-VS-BROADBAND SEPARATION
Spectral processing across attack and sustain, independently.
This is special, the Spectral Slider separates the tonal resonances in a signal from the noise content, then lets you process each across attack and sustain. On a sci-fi element, add tonal character to the attack and leave the sustain clean. On a guitar, pull the pick attack off the front of the note without touching the body. On a snare, shape the ring without touching the crack.

PER-BAND PARAMETRIC EQ – EQ WHERE YOU WANT IT
Multiple EQ bands inside each Attack and Sustain module
This is special, the Spectral Slider separates the tonal resonances in a signal from the noise content, then lets you process each across attack and sustain. On a sci-fi element, add tonal character to the attack and leave the sustain clean. On a guitar, pull the pick attack off the front of the note without touching the body. On a snare, shape the ring without touching the crack.
BUILT FOR SOUND DESIGN – DRUMS, FOOTSTEPS, IMPACTS, DIALOGUE, WHOOSHES
A transient processor plugin made for the work sound designers actually do
Footsteps that land without losing their weight. Impacts that punch through without burying everything around them. Dialogue with plosives pulled cleanly off the front of each line. Whooshes and risers whose leading edge stays sharp while the bloom of the sustain is controlled separately. Sidechain trigger input for signal interaction, presets drawn from real production sessions from top-name artists, and AudioSuite support for batch-processing SFX libraries in Pro Tools. Every control on the plug-in exists because a sound designer needs it.
EQUALLY POWERFUL FOR MUSIC PRODUCTION
The same powerful transient design on drums, vocals, guitars and more
The processing within TRANSFORCE applies to any material where attack and sustain behave differently. Tighten the snap of every transient on a drum bus while letting the sustain breathe. Pull the pick attack off a guitar without touching the body of the note. Balance the hammer strike of a piano against its sustain. The Stylize module adds the low-end body that modern productions are built on; the Clipper adds weight; the Limiter handles output. This is one plug-in, five modules, powerful for music and post.
Typical Use Cases
Movie & TV
Sound Design for Drums, footsteps, impacts, dialogue, whooshes.
Game Audio
Shaping large sets of sounds at scale.
Sound Design
Sci-fi, impact, and creature work where attack and sustain need different tonal treatment.
Drums
Drum bus and individual drum processing.
Music Production
Guitars, piano, vocals, and any material with a defined attack and decay.
SUPPORTING THE ART OF CINEMATIC SOUND
Designed for sound designers and music producers who shape the world of film and television.
Multi-Platinum Music Producer / Mix Engineer
MK • SONNY FODERA
Sound Designer
Mission Impossible - Dead Reckoning (Oscar-Nominee for Best Sound)
Producer / Engineer / Mixer
Founder of Morcheeba • Biz Markie • Big Daddy Kane • Slick Rick • Mos Def • Janko Nilovic
Emmy-Winning Composer / Producer
DJ RECTANGLE • EMINEM • DISNEY+
Sound Designer
Bad Boys: Ride or Die • The Tattooist of Auschwitz • Carry-On
Grammy-Winning Producer / Engineer / Mixer
UNKLE • SIA • JOHN GRANT
Grammy-Winning Recording Engineer / Mixer
Masters Of The Air • Venom • Elio
Emmy-Winning Sound Designer
The Queen’s Gambit • The Four Seasons
TOTAL TRANSIENT CONTROL
The Transient Shaper Built For Sound Designers
TRANSFORCE treats attack and sustain as two separate signals. Each one gets its own parametric EQ across multiple bands, its own saturation, and its own tonal vs broadband split. Built by sound designers, for the sessions sound designers actually run. Equally at home in music production.

FREQUENTLY ASKED QUESTIONS
What is a transient shaper?
A transient shaper is a plug-in that processes the attack and sustain portions of a sound independently. Where a compressor reacts to level, a transient shaper detects the front edge of each sound and gives you separate control over that edge and the body that follows. TRANSFORCE takes that separation further by giving each side its own parametric EQ, saturation, and tonal vs broadband control.
What’s the difference between a transient shaper and a compressor?
A compressor controls dynamic range by reducing the level above a threshold. A transient shaper detects attack and sustain as separate events and lets you shape each independently, without setting a threshold or introducing compression side effects. A compressor reacts to the loudness of a sound, whereas a transient shaper reacts to its position in time.
Is a transient shaper better than EQ?
They are different. EQ acts on a frequency band regardless of when that frequency occurs, whereas a transient shaper acts on when something happens, regardless of its frequency. TRANSFORCE combines both, with parametric EQ per band on attack and sustain, which is why it covers ground neither tool can cover on its own.
What does TRANSFORCE do that free transient shapers don’t?
Free transient shapers give you single-band attack and sustain control, and they can work well on simple sources. TRANSFORCE adds parametric EQ on each side, per-band saturation, and the Spectral Slider that separates tonal content from noise. If you’re shaping a kick that just needs more snap, a free tool is fine. If you’re working on layered SFX, dialogue plosives, or anything where tonal and broadband content want different treatment, that’s where most free plugins fall short.
Which DAWs does TRANSFORCE work with?
Pro Tools, Logic Pro, Cubase, Nuendo, Ableton Live, Studio One, Reaper, Bitwig Studio, and FL Studio. Any modern DAW that supports VST 3, AU, AAX Native, or AudioSuite. Native Apple Silicon supported.
Does TRANSFORCE support AudioSuite in Pro Tools?
Yes. AAX Native and AudioSuite are both supported. AAX DSP is not supported, so HDX dub-stage workflows that require DSP acceleration aren’t available.
Does TRANSFORCE add latency?
Yes. Transient detection requires look-ahead, so the plug-in always adds some latency. The amount is user-adjustable to balance accuracy against latency, but cannot be set to zero. Modern DAWs compensate for latency automatically.
Is there a demo or trial?
Yes, we have a fully functional 14-day trial available. You can select it at the top of the product page or via the button below.
GET THE TRIAL NOW
TRANSFORCE AT A GLANCE

Key Features
- Independent parametric EQ on attack and sustain, with multiple bands per module
- Per-module saturation
- Spectral Slider — tonal-vs-broadband separation across attack and sustain
- Transient section with hold, decay, and sidechain trigger input
- Stylize, Clipper, and Limiter modules
- Up to 4× oversampling
- Look-ahead transient detection (user-adjustable)
- Full parameter automation
- Presets drawn from real production scenarios
- VST 3, AU, AAX Native, AudioSuite. Native Apple Silicon. NKS-Ready.
Use Cases
- Sound design for film, TV, and games — drums, footsteps, impacts, dialogue, whooshes
- Game audio teams shaping large sets of sounds at scale
- Sci-fi, impact, and creature work where attack and sustain need different tonal treatment
- Drum bus and individual drum processing
Format: Software Plugin (VST 3, AU, AAX) for Windows & Mac
Required Hard Disk Space: 124 MB
Available As: Download

VST® is a trademark of Steinberg Media Technologies GmbH, registered in Europe and other countries.
System
| Windows | Windows 10 (64-bit), 8 GB Ram, Intel® Core™ i5 (relatively recent) |
| Mac | macOS 10.15, 4 GB RAM, Apple Silicon or Intel® Core™ i5 (relatively recent) |
Download License Agreement
SOFTWARE
Please note: This plug-in requires an audio host software. It does not work as a standalone application.
It works with the most common audio host software apps that support VST 3, AU or AAX plug ins:
| |
||
ILOK
Available licensing options:
Machine License activation and USB Dongle


CHANGELOG
Please visit: https://www.boomlibrary.com/sound-effects/transforce/#changelog








